Login
Please specify the quantity of product(s).
nano tag Activity Measuring Device
Wireless Temperature and Activity Measurement
| Item | Product | Price | QTY |
|---|---|---|---|
| 56747 | nano tag for Mice and Rats (20/pk) requires 56745S and 56748 | Login | |
| 56746 | nano tag for Mice and Rats (10/pk) requires 56745S and 56748 | Login | |
| 56745 | nano tag for Mice and Rats (5/pk) requires 56745S and 56748 | Login | |
| 56745S | nano tag Viewer Software | Login | |
| 56748 | Contactless RFID card reader/writer "PaSoRi" (cable) | Login | |
| 56745D | nano tag for Mice and Rats Demo Set with Software | Login |
Add to Cart
Continuous monitoring of activity and temperature up to 60 days!
Record from multiple animals simultaneously
Animals can be implanted with a nano tagTM device and activity and temperature data can be collected from all of them at the same time.
Continuously record for up to 60 days*
The nano tagTM internal battery will last for up to 2 months. Data can be recorded not only continuously but also intermittently for 60 days by turning on/off the power externally. Additionally, “timer stop mode” enables you to set up the device so that it will start/stop recording automatically at designated times.
* The battery life (60 days) is based on 24-hour measurement with a single 2 min/day communication for retrieval of data. Battery life is dependent on a number of factors pertaining to use.
FeliCaTM communication
Recorded data are stored in the nano tagTM device. Stored data is retrieved into your PC by FeliCaTM communication. A simple, light touch of the RFID card reader/writer(PaSoRiTM) on the nano tagTM, can be used to start/stop data recording. Recorded data is retrieved while the nano tagTM is implanted in animal body*.
Antenna surface
Battery surface
Small and Lightweight
The nano tagTM is smaller than a dime (18.8mm dia.) and weights only 2.7g (including the battery). To make it lightweight and waterproof, nano tag® is a single-use device or disposable. The battery is unreplaceable.
Activity measuring method
Activity is defined as Cross Count Data.
[ Cross Count ]
Counts the number of times XYZ acceleration vector synthesized waveform crosses the threshold levels from bottom to top per Recording Interval(Cross Count).
Recording Modes
The following 3 modes are available.
- “Loop mode” – Overwrite existing data from the beginning when the memory becomes full
- “Memory – full stop mode” – Data is stored sequentially until the memory becomes full
- “Timer start/stop mode” – Start/stop at designated times
nano tag® Viewer Software “nanotag/Viewer”
The nanotag/Viewer enables you to change the setting, retrieve data, make a graph, and output to a CSV data file.
- Change settings of nano tagTM
- Control start/stop of data acquisition
- Retrieve data, Reset
- Make graphs
- Output to CSV data files
nano tagTMviewer software
This software is necessary to use nano tagTM
Specifications
| Detection method | Three-axis accelerometer, Temperature sensor |
| Communication system | Near Field Communication (FeliCaTM system) |
| Communication distance | Approximately 10mm |
| Time accuracy | ±60 seconds / month |
| Internal battery | CR1220 (unreplaceable) |
| Battery life | Approximately 2 months (under 24-hour measurement with a single 2 min/day communication for retrieval of data using FeliCaTM) |
| Recording mode | 1. Loop mode 2. Memory - full stop mode 3. Timer start/stop mode |
| Activity data | Cross Count |
| Temperature | 10 - 45.875℃ Measurable temperature range : 15.875℃ (Resolution : 0.0625℃ Accuracy : ±0.5℃) |
| Waterproof | Equivalent to IPX7 ( IEC529) |
| Material | ABS, Epoxy |
| Size | 18.8 X 14.2 X 7.1 mm |
| Weight | Approximately 2.7g |
Sensor: 3-axes Accelerometer
Communication: NFC
Time Accuracy: Monthly difference +/- 60sec
Battery: CR1220
Battery Life: 60 days
Measurement mode: Loop, Memory-Full Stop, Timer